NSN 3130-01-232-0538 · NIIN 012320538 · FSC 3130
NO DASHES 3130012320538
In Stock
HOUSING,BEARING UNIT
Bearings, Mounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAWY | COUNTERBORE DIAMETER | INCHES NOMINAL 2.000 |
| AAWZ | COUNTERBORE DEPTH | INCHES NOMINAL 1.875 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 1.282 AND INCHES MAXIMUM 1.284 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 2.0000 AND INCHES MAXIMUM 2.0010 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 2.000 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 15.000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 8.250 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 17.750 |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | INCHES NOMINAL 2.750 |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 4.4900 |
| ANJS | SHAFT END TYPE | OPEN |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 6.500 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED, COUNTERBORED |
| FEAT | SPECIAL FEATURES | SECOND BEARING MOUNTING HOLE 1.000 IN. DIA MIN TO 1.001 IN. DIA MAX,CENTERED 3.500 IN. RIGHT OF VERT CL,0.750 IN. BELOW HORIZ CL; THIRD BEARING MOUNTING HOLE 0.750 IN. DIA MIN TO 0.751 IN. DIA MAX CENTERED 5.500 IN. LEFT OF VERT CL,1.250 IN. BELOW HORIZ CL; 0.250 IN. DIA THRU HOLE FROM BASE TO FIRST BORE,TAP 0.125 PTF; TWO 0.250-20UNC-2B TAPPED THRU HOLES IN FACE CENTERED 1.120 IN. RIGHT OF THIRD BEARING MOUNTING HOLE,0.380 ABOVE AND BELOW THIRD BEARING MOUNTING HOLE HORIZ CL |
| MATT | MATERIAL | OVERALL COPPER ALLOY 958 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-B-24480 |