NSN 5365-01-517-4906 · NIIN 015174906 · FSC 5365
NO DASHES 5365015174906
In Stock
SHIM
Bushings, Rings, Shims, and Spacers
Application: TAIL SECTION
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.406 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.630 |
| ADUM | OVERALL THICKNESS | INCHES NOMINAL 0.062 |
| ADUP | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | INCHES NOMINAL 0.380 |
| ADUQ | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | INCHES NOMINAL 0.630 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES NOMINAL 1.300 |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES NOMINAL 0.450 |
| ADVJ | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | INCHES NOMINAL 0.380 |
| AECS | BOLT HOLE QUANTITY | 3 |
| AGAV | END ITEM IDENTIFICATION | TAIL SECTION |
| FEAT | SPECIAL FEATURES | LAMINATED SHIM |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-22499 TO 3-013 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 014526900. An older drawing citing one of those numbers resolves here.