NSN 5905-00-552-5487 · NIIN 005525487 · FSC 5905
NO DASHES 5905005525487
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 309.0 AND MAXIMUM 320.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.062 AND INCHES MAXIMUM 1.312 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.032 AND INCHES MAXIMUM 1.156 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| AAPN | SECTION QUANTITY | 1 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | MEGOHMS SINGLE SECTION 5.0 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.468 AND INCHES MAXIMUM 0.656 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 5 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.515 AND INCHES MAXIMUM 0.547 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.515 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
Supersedes
This item replaces cancelled NIINs 004887800 · 005836933. An older drawing citing one of those numbers resolves here.