NSN 6105-00-318-4914 · NIIN 003184914 · FSC 6105
NO DASHES 6105003184914
In Stock
MOTOR,CONTROL
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAJU | OVERALL LENGTH | INCHES 5.437 |
| AAJV | OVERALL WIDTH | INCHES 2.625 |
| AXGY | MOUNTING METHOD | FLANGE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 2400.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.165 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 0.375 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 0.875 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 65.0 AND OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 55.0 |
| ACDC | CURRENT TYPE | INPUT AC |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 3.250 |
| FAAZ | PHASE | INPUT TWO |
| FEAT | SPECIAL FEATURES | ADDITIONAL FLANGE LOCATED AT LOAD END,4 ADDITIONAL MTG HOLES 0.206 IN. DIA. ON 3.250 IN. DIA. BOLT CIRCLE AT 90.0 DEGREES |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 4 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| BFML | CONTROL FIELD WINDING TYPE | TWO WINDINGS, PARALLEL CONNECTED |
| AAJT | OVERALL HEIGHT | INCHES 3.250 |
| BKPB | CURRENT RATING METHOD | NO LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 13.0 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 115.0 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFMJ | CONTROL FIELD CURRENT RATING IN AMPS | 0.350 |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 330.0 |
| CWHZ | SHAFT END CHARACTERISTIC | IDENTICAL ENDS SINGLE STYLE A1 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES MINIMUM 0.187 AND INCHES MAXIMUM 0.188 |
Supersedes
This item replaces cancelled NIIN 002636356. An older drawing citing one of those numbers resolves here.