NSN 5905-00-003-2497 · NIIN 000032497 · FSC 5905
NO DASHES 5905000032497
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22097 TO 4 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.375 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.150 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.080 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22097 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.375 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.150 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.072 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.075 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -100.0 TO 100.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.470 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AAPN | SECTION QUANTITY | 1 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 6.000 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.419 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.375 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3252L1-501 | 80294 |
| M39015/3-006LM | 81349 |
| MIL-PRF-22097/4 | 81349 |
| MILR22097-4 | 81349 |
| MIL-R-39015/3 | 81349 |
| RJ24FL501 | 81349 |
| Q 317 106 156 | S3092 |
Supersedes
This item replaces cancelled NIINs 013402112 · 001924474 · 010321813. An older drawing citing one of those numbers resolves here.