NSN 5905-00-011-7102 · NIIN 000117102 · FSC 5905
NO DASHES 5905000117102
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 3 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.468 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.593 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 48.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.250 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | LOCKING BUSHING AND SHAFT W/PANEL SEAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 250.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 292.0 AND MAXIMUM 298.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2JC2779-61 | 71468 |
| RV6TAYSA251A | 81349 |
| MILR94-3 | 81349 |
| MIL-PRF-94/3 | 81349 |
| 7961 | 97979 |
| 2JC2779H61 | 97942 |
| W2250 | 01121 |
| W2250C | 01121 |
| BA99380-18 | 06KW9 |
Supersedes
This item replaces cancelled NIINs 000569664 · 008143976 · 008993765. An older drawing citing one of those numbers resolves here.