NSN 5905-00-012-1059 · NIIN 000121059 · FSC 5905
NO DASHES 5905000121059
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -3.0 TO 3.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED UPPER ADJACENT SIDE TWO ROWS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 3600.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.20 TO 0.20 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.002 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.003 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 70.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACES |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 6 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| AEGA | LATERAL RUNOUT | INCHES 0.005 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 5.0 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.938 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.312 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.938 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.60 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.60 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3500S-D41-502/502 | 80294 |
| 51224-1 | 14058 |