NSN 5905-00-018-9402 · NIIN 000189402 · FSC 5905
NO DASHES 5905000189402
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.1249 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 345.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.75 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.75 |
| AEFY | SHAFT END PLAY | INCHES 0.004 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.25 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AAPN | SECTION QUANTITY | 1 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.7500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.125 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.781 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| AEDX | SHAFT STYLE | |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.8750 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.625 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.875 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |