NSN 5905-00-020-3001 · NIIN 000203001 · FSC 5905
NO DASHES 5905000203001
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.00000 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.06700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.820 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.880 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.05700 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.020 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.470 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.800 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.99500 AND INCHES MAXIMUM 2.00500 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.09800 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -400.0 TO 400.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR 1ST SECTION 0.1 AND FREE AIR 2ND SECTION 0.07 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 125.0 |
| CXHN | SHAFT BEARING TYPE | BALL |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 6 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS 1ST SECTION 10.000 AND OHMS 2ND SECTION 28.000 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 347.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |