NSN 5905-00-023-2340 · NIIN 000232340 · FSC 5905
NO DASHES 5905000232340
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.562 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.1248 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION ALL SECTIONS -1.0 TO 1.0 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 40.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 1.4 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 8 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.062 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 100.0 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.112 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | ALL SECTIONS 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 0.7 |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| AAPN | SECTION QUANTITY | 2 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.062 |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES NOMINAL 0.750 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1060 | 04274 |
| 00012-2030 | 04274 |
| D54-17M | 12697 |
| CM34460 | 12697 |
| 55-3395 | 18065 |