NSN 5905-00-025-5990 · NIIN 000255990 · FSC 5905
NO DASHES 5905000255990
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.072 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.075 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.080 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.375 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.150 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.375 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.419 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39015 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39015 TO 3 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 6.000 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.375 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.150 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 0.470 |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M39015/3-006LP | 81349 |
| M39015-03-006LP | 81349 |
| RTR24DL501P | 81349 |
| M39015/3-006LR | 81349 |
| MIL-R-39015/3 | 81349 |
| M39015/3-006LM | 81349 |
| 428529-6 | 89305 |
| 200-66-501 | 94271 |
| 381-9066-160 | 13499 |
Supersedes
This item replaces cancelled NIINs 001483779 · 001613028 · 004123580 · 008384201 · 010589365. An older drawing citing one of those numbers resolves here.