NSN 5905-00-026-9134 · NIIN 000269134 · FSC 5905
NO DASHES 5905000269134
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.957 |
| ABNB | FIRST FLAT LENGTH | INCHES MINIMUM 1.344 |
| ABNC | FLAT HEIGHT | INCHES NOMINAL 0.344 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 6.090 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.375 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.500 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 2.410 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 6.815 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 160.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 16.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 20.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 315.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 390.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 300.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILR22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M22-11-00121FG | 81349 |
| MIL-PRF-22/11 | 81349 |
| MILR22-11 | 81349 |
| RP401FG500KK | 81349 |
| RP401FH500KK | 81349 |
| M22/11-00121FH | 81349 |
Supersedes
This item replaces cancelled NIIN 001556975. An older drawing citing one of those numbers resolves here.