NSN 5905-00-052-5749 · NIIN 000525749 · FSC 5905
NO DASHES 5905000525749
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.31150 AND INCHES MAXIMUM 1.31200 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.12700 AND INCHES MAXIMUM 0.13700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.542 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.180 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.315 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.07300 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.453 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.120 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.519 AND INCHES MAXIMUM 0.561 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.870 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.633 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.43200 AND INCHES MAXIMUM 1.44200 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.08800 AND INCHES MAXIMUM 0.09800 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 350.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.70 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.000 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 180.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -2.00 TO 2.00 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION SINGLE SECTION -2.0 TO 2.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 4 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7648736P003 | 03538 |
| 60512 | 10112 |
| 749-6173 | 12205 |