ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Electrical & Electronic Components / NSN 5905-00-056-4295
NSN 5905-00-056-4295  ·  NIIN 000564295  ·  FSC 5905
NO DASHES 5905000564295
In Stock

RESISTOR,VARIABLE,NONWIRE WOUND,

Resistor

Technical characteristics

45 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AAPNSECTION QUANTITY11
AAQLBODY STYLE
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETERINCHES NOMINAL 0.9688
AAVMPILOT LENGTHINCHES NOMINAL 0.6200
ABNBFIRST FLAT LENGTHINCHES NOMINAL 0.375
ABNCFLAT HEIGHTINCHES NOMINAL 0.105
ABPAUNDERCUT DIAMETERINCHES NOMINAL 0.968
ABPCUNDERCUT WIDTHINCHES MINIMUM 0.0570
ABPMBODY DIAMETERINCHES NOMINAL 1.062
ABWVSHAFT DIAMETERINCHES NOMINAL 0.1247
ABXFSHAFT LENGTHINCHES NOMINAL 0.437
ADAQBODY LENGTHINCHES NOMINAL 2.680
AECZMOUNTING LIP DIAMETERINCHES MAXIMUM 1.0750
AEDAMOUNTING LIP DEPTHINCHES NOMINAL 0.0620
AEDXSHAFT STYLE
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATIONNOMINAL 340.0
AEFKMAXIMUM STARTING TORQUEINCH-OUNCES 3.45
AEFLMAXIMUM RUNNING TORQUEINCH-OUNCES 3.45
AEFMMAXIMUM STOP TORQUEINCH-OUNCES 32.00
AEFYSHAFT END PLAYINCHES 0.005
AEFZSHAFT RUNOUTINCHES 0.002
AEGALATERAL RUNOUTINCHES 0.001
AEGBPILOT DIAMETER RUNOUTINCHES 0.001
AEGCSHAFT RADIAL PLAYINCHES 0.001
AXGYMOUNTING METHODCLAMP RING(S)
BYDTBEARING TYPESHAFT BALL
CQCCELECTRICAL RESISTANCE PER SECTIONKILOHMS 1ST SECTION 10.0 AND KILOHMS 2ND SECTION 7.5 AND KILOHMS 3RD SECTION 30.0 AND KILOHMS 4TH SECTION 7.5 AND KILOHMS 5TH SECTION 20.0 AND KILOHMS 6TH SECTION 20.0 AND KILOHMS 7TH SECTION 20.0 AND KILOHMS 8TH SECTION 20.0 AND KILOHMS 9TH SECTION 2.0 AND KILOHMS 10TH SECTION 30.0 AND KILOHMS 11TH SECTION 30.0
CQCHTAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION2ND SECTION 38.17 AND 2ND SECTION 87.27 AND 2ND SECTION 136.37 AND 4TH SECTION 38.17 AND 4TH SECTION 87.27 AND 4TH SECTION 136.37 AND 5TH SECTION 156.36 AND 6TH SECTION 156.36 AND 6TH SECTION 232.72 AND 7TH SECTION 156.36 AND 8TH SECTION 156.36 AND 8TH SECTION 232.72
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEGNOMINAL 360.0
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION1ST SECTION -0.25 TO 0.25 AND 2ND SECTION -1.00 TO 1.00 AND 3RD SECTION -0.65 TO 0.65 AND 4TH SECTION -1.00 TO 1.00 AND 5TH SECTION -1.50 TO 1.50 AND 6TH SECTION -1.50 TO 1.50 AND 7TH SECTION -1.50 TO 1.50 AND 8TH SECTION -1.50 TO 1.50 AND 9TH SECTION -2.00 TO 2.00 AND 10TH SECTION -0.65 TO 0.65 AND 11TH SECTION -0.30 TO 0.30
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWERALL SECTIONS 100.0
CQTMTERMINAL LOCATIONLOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUSALL SECTIONS -400.0 TO 400.0
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTSFREE AIR ALL SECTIONS 1.0
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
CRJSFIXED TAP QUANTITY PER SECTION2ND SECTION 3 AND 4TH SECTION 3 AND 5TH SECTION 1 AND 6TH SECTION 2 AND 7TH SECTION 1 AND 8TH SECTION 2
CRKSTAP LOCATION TOLERANCE PER SECTIONDEG ANGULAR ROTATION ALL SECTIONS -2.0 TO 2.0
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENTALL SECTIONS -10.0 TO 10.0
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS EQUATION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWERALL SECTIONS 25.0
TESTTEST DATA DOCUMENTDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 97942-577R900
TTQYTERMINAL TYPE AND QUANTITYTURRET 45

Cross-references

4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
577R900H1297942
A09104454
116FTS25908815
752-624012205