NSN 5905-00-056-9443 · NIIN 000569443 · FSC 5905
NO DASHES 5905000569443
In Stock
RESISTOR,FIXED,WIRE WOUND
Resistor
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 510.000 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.050 TO 0.050 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 125.0 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.500 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.125 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.407 AND INCHES MAXIMUM 0.437 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 0.900 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CSCF | TERMINAL TYPE | WIRE LEAD |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-64A6A14 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| R1119 | 54294 |
| RS1A42 | 91637 |
| 15A | 06416 |
| CC10A | 05347 |
| 64A6A14-510R00A21 | 10001 |