NSN 5905-00-061-2154 · NIIN 000612154 · FSC 5905
NO DASHES 5905000612154
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.96880 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.06200 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.462 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.000 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.05700 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.000 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.1246 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.620 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.812 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.362 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.09500 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.06200 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 260.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.00 |
| AEFY | SHAFT END PLAY | INCHES 0.00200 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.0007 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.15 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -500.0 TO 500.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.125 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 115.0 |
| CXHN | SHAFT BEARING TYPE | BALL |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 89954-539D763 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 539D763P1 | 89954 |
| 9106 | 04454 |
| 116FTS116Z | 08815 |