NSN 5905-00-061-2937 · NIIN 000612937 · FSC 5905
NO DASHES 5905000612937
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABNC | FLAT HEIGHT | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.220 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.156 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.250 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABNB | FIRST FLAT LENGTH | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.328 |
| AAPN | SECTION QUANTITY | 2 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.266 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.531 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 10.0 AND KILOHMS 2ND SECTION 250.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 120.0 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 3.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 6 |