NSN 5905-00-072-8531 · NIIN 000728531 · FSC 5905
NO DASHES 5905000728531
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | ALL SECTIONS 7300.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 3.128 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.453 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 354.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 3.10 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -1.0 TO 1.0 AND 2ND SECTION -5.0 TO 5.0 AND 3RD SECTION -5.0 TO 5.0 AND 4TH SECTION -5.0 TO 5.0 AND 5TH SECTION -5.0 TO 5.0 |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 14.6 AND KILOHMS 2ND SECTION 100.0 AND KILOHMS 3RD SECTION 9.75 AND KILOHMS 4TH SECTION 10.0 AND KILOHMS 5TH SECTION 10.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.25 TO 0.25 AND 2ND SECTION -0.20 TO 0.20 AND 3RD SECTION -0.15 TO 0.15 AND 4TH SECTION -4.00 TO 4.00 AND 5TH SECTION -4.00 TO 4.00 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3RD SECTION 1 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.4380 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDQ | UNDERCUT DIAMETER | INCHES NOMINAL 0.125 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.453 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.60 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.438 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AEFY | SHAFT END PLAY | INCHES 0.0025 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AGQL | UNDERCUT LENGTH | INCHES NOMINAL 0.375 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 16 |
| AAPN | SECTION QUANTITY | 5 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.847 |