NSN 5905-00-079-1968 · NIIN 000791968 · FSC 5905
NO DASHES 5905000791968
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 105.0 |
| AEGA | LATERAL RUNOUT | INCHES 0.003 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00150 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 10.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.62500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.06200 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.875 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 9 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.30 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.06200 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.500 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.580 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.87500 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.06200 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 354.0 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.30 |