NSN 5905-00-079-3499 · NIIN 000793499 · FSC 5905
NO DASHES 5905000793499
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.700 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.300 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LOWER ADJACENT SIDE SINGLE ROW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 1.000 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-27208 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-27208 TO 3 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.500 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.093 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.115 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.058 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.250 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.295 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.312 |
| AEDX | SHAFT STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAQL | BODY STYLE | |
| AAPN | SECTION QUANTITY | 1 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RT11C2P501 | 80294 |
| MILR27208-3 | 81349 |
| RT11C2P501 | 81349 |
| 5905PL0992160 | 9009H |
| 4171784-8 | 05869 |
| 4171784-008 | 05869 |
Supersedes
This item replaces cancelled NIIN 008158319. An older drawing citing one of those numbers resolves here.