NSN 5905-00-088-3550 · NIIN 000883550 · FSC 5905
NO DASHES 5905000883550
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LOWER ADJACENT SIDE TWO ROWS |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.20 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.700 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.100 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.300 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 8280.0 AND MAXIMUM 9720.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -70.0 TO 70.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.297 AND INCHES MAXIMUM 1.329 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.796 AND INCHES MAXIMUM 0.828 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.270 AND INCHES MAXIMUM 0.290 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.088 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.062 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.234 AND INCHES MAXIMUM 1.266 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.270 AND INCHES MAXIMUM 0.290 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.296 AND INCHES MAXIMUM 0.326 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 7.50 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 335C779H12 | 79500 |
| 3010P1-503 | 80294 |
| 1591-50K | 91637 |
| 335C779H12REVE | 97942 |
| 335C779H12 | 97942 |
| 92C847-016 | 04660 |
Supersedes
This item replaces cancelled NIINs 002252105 · 004394440. An older drawing citing one of those numbers resolves here.