NSN 5905-00-111-8414 · NIIN 001118414 · FSC 5905
NO DASHES 5905001118414
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.156 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.250 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 9000.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.250 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.156 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.062 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.050 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.250 |
| AXGY | MOUNTING METHOD | TERMINAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INALS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 9000.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 2.000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.290 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 580R378H11 | 97942 |
| 12-1K | 17826 |