NSN 5905-00-115-8074 · NIIN 001158074 · FSC 5905
NO DASHES 5905001158074
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 9000.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 9000.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.110 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LEFT ADJACENT SIDE SINGLE ROW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.375 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.145 AND INCHES MAXIMUM 0.155 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.360 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.435 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.300 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.690 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.470 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.074 |
| ABTD | MOUNTING SLOT WIDTH | INCHES MINIMUM 0.074 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.414 AND INCHES MAXIMUM 0.424 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | SLOT AND UNTHREADED HOLE(S) |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.100 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.070 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.060 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 08241-GVL20404-3 |
| AAPN | SECTION QUANTITY | 1 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.210 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3290P1-102 | 80294 |
| 202-107HS1K | 94271 |
| 99046406 | D2416 |
| 99046406 | F8224 |
| Q317106007 | S3092 |
| GVL20404-3 | 08241 |
| 202-107HS1K | 0EBU2 |