NSN 5905-00-116-1059 · NIIN 001161059 · FSC 5905
NO DASHES 5905001161059
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.374 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.300 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.260 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.300 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.370 |
| AEFD | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 240.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 5.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.100 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 260.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -100.0 TO 100.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -20.0 TO 20.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2100-2060 | 28480 |
| 40-001030-03 | 30890 |
| 62-202-1 | 73138 |
| 82PR50 | 73138 |
| 82PR50-289A | 73138 |
| 3329W-1-500 | 80294 |
Supersedes
This item replaces cancelled NIIN 004701361. An older drawing citing one of those numbers resolves here.