NSN 5905-00-147-5866 · NIIN 001475866 · FSC 5905
NO DASHES 5905001475866
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.31200 AND INCHES MAXIMUM 1.31250 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.531 AND INCHES MAXIMUM 2.655 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.303 AND INCHES MAXIMUM 1.313 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.07300 AND INCHES MAXIMUM 0.07800 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.458 AND INCHES MAXIMUM 1.468 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.739 AND INCHES MAXIMUM 1.749 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.813 AND INCHES MAXIMUM 1.828 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.42700 AND INCHES MAXIMUM 1.44200 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.08800 AND INCHES MAXIMUM 0.09800 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 349.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.80 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.35 |
| AEFY | SHAFT END PLAY | INCHES 0.00250 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.003 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 5.000 AND KILOHMS 2ND SECTION 5.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.40 TO 0.40 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -150.0 TO 150.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 2ND SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| FEAT | SPECIAL FEATURES | EXTERNAL FIXED RESISTOR MTD ACROSS TERMINAL 1 AND 4 EACH SECTION |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2877111 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 4 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 561716 | 56232 |
| 158W2-5KP0RM5 | 08815 |
| 2877111 | 10001 |