NSN 5905-00-147-7831 · NIIN 001477831 · FSC 5905
NO DASHES 5905001477831
In Stock
RESISTOR,FIXED,WIRE WOUND,NONIND
Resistor
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39009 TO 2 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARE | REACTANCE CHARACTERISTIC | NONINDUCTIVE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.374 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.688 AND INCHES MAXIMUM 0.812 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.500 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.437 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CTJS | UNPACKAGED UNIT WEIGHT | GRAMS NOMINAL 8.8 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.133 |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 68.100 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 6.000 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AKNA | INCLOSURE TYPE | ENCASED |
| BYML | MOUNTING HOLE SIZE | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.099 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MCX100-68R1F | 53655 |
| ALN10-68R1F | 54294 |
| RER45F68R1M | 81349 |
| MILR18546-1 | 81349 |
| RE65N68R1 | 81349 |
| MIL-R-39009/2 | 81349 |
| MIL-PRF-39009/2 | 81349 |
| RER45F68R1R | 81349 |
| NH10-68R1F | 91637 |
| 3010NM68R1-1 | 00213 |
| 10CHN68R1F | 06416 |
Supersedes
This item replaces cancelled NIINs 004975683 · 008912397. An older drawing citing one of those numbers resolves here.