NSN 5905-00-211-1886 · NIIN 002111886 · FSC 5905
NO DASHES 5905002111886
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BYML | MOUNTING HOLE SIZE | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.099 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARE | REACTANCE CHARACTERISTIC | INDUCTIVE |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AFWW | TERMINAL WIDTH | INCHES MINIMUM 0.140 |
| AKNA | INCLOSURE TYPE | ENCASED |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 6.000 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39009 TO 1 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.437 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| STYL | STYLE DESIGNATOR | |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 249.000 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.374 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.688 AND INCHES MAXIMUM 0.812 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.500 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 90R123-2500F | 76823 |
| MIL-R-39009/1 | 81349 |
| MIL-PRF-39009/1 | 81349 |
| RE65G2500 | 81349 |
| RER65F2490R | 81349 |
| RE65G2500 | 03950 |
| 90R123-2500F | 0JRC1 |
| 8213508-8 | 19200 |
Supersedes
This item replaces cancelled NIINs 000805898 · 009519748 · 010488710 · 012190223. An older drawing citing one of those numbers resolves here.