NSN 5905-00-227-6844 · NIIN 002276844 · FSC 5905
NO DASHES 5905002276844
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.562 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.875 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.437 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.094 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.531 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MAXIMUM 320.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS SINGLE SECTION -3.0 TO 0.0 AND -25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 120 DEG CELSIUS SINGLE SECTION -0.0 TO 3.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.515 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2100-0060 | 1LQK8 |
| 2100-0060 | 28480 |
| RV4NAYSD203A | 81349 |
| MILR94-5 | 81349 |
| MIL-PRF-94/5 | 81349 |
| RV4LAYSD203A | 81349 |
| J8329A | 01121 |
| JA1L040S203UC | 01121 |
| JA2L048S203UC | 01121 |
| 078-20039-007 | 12131 |
| 380-2002M 3/4 IN. SHAFT | 12697 |
Supersedes
This item replaces cancelled NIIN 000676203. An older drawing citing one of those numbers resolves here.