NSN 5905-00-231-3858 · NIIN 002313858 · FSC 5905
NO DASHES 5905002313858
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 24 |
| AEFY | SHAFT END PLAY | INCHES 0.0025 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 5.0 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 2ND SECTION 345.0 AND 6TH SECTION 345.0 AND 7TH SECTION 0.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -1.00 TO 1.00 AND 2ND SECTION -0.50 TO 0.50 AND 3RD SECTION -0.50 TO 0.50 AND 4TH SECTION -1.00 TO 1.00 AND 5TH SECTION -1.00 TO 1.00 AND 6TH SECTION -0.25 TO 0.25 AND 7TH SECTION -0.50 TO 0.50 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2552844 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACES |
| AAPN | SECTION QUANTITY | 7 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 2.8750 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -150.0 TO 150.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2ND SECTION 1 AND 6TH SECTION 1 AND 7TH SECTION 1 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -5.0 TO 5.0 AND 2ND SECTION -5.0 TO 5.0 AND 3RD SECTION -1.0 TO 1.0 AND 4TH SECTION -5.0 TO 5.0 AND 5TH SECTION -5.0 TO 5.0 AND 6TH SECTION -5.0 TO 5.0 AND 7TH SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR AND 2ND SECTION GRAPH AND 3RD SECTION GRAPH AND 4TH SECTION SINGLE SIDED SQUARE AND 5TH SECTION GRAPH AND 6TH SECTION GRAPH AND 7TH SECTION GRAPH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| FEAT | SPECIAL FEATURES | SECTIONS 1,4,AND 5 EACH HAVE A 5K OHM WIPER LOAD; SECTIONS 2,6,AND 7 EACH HAVE A RESISTANCE ELEMENT LOCATED ACROSS THE TAP |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 358.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.90 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 3.60 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 4.500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 5.250 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 2.875 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 3.031 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 3.0000 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.625 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.