NSN 5905-00-260-2610 · NIIN 002602610 · FSC 5905
NO DASHES 5905002602610
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22097 TO 2 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.190 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.315 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 8.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.700 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 1.000 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 200.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.300 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -250.0 TO 250.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22097 |
| AAPN | SECTION QUANTITY | 1 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.058 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.500 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.093 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.115 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 869013-0201 | 65597 |
| RJ12CY201 | 81349 |
| MIL-R-22097/2 | 81349 |
| MIL-PRF-22097/2 | 81349 |
| RJ12CW201 | 81349 |
| RJ11CL201 | 81349 |
Supersedes
This item replaces cancelled NIINs 001279265 · 004842992. An older drawing citing one of those numbers resolves here.