NSN 5905-00-302-5053 · NIIN 003025053 · FSC 5905
NO DASHES 5905003025053
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAT | BODY WIDTH | INCHES NOMINAL 0.594 |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.438 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQA | HEAT SINK LENGTH | INCHES 7.000 |
| AAQB | HEAT SINK WIDTH | INCHES 5.000 |
| AAQD | HEAT SINK HEIGHT | INCHES 2.000 |
| AAQE | HEAT SINK THICKNESS | INCHES 0.040 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARE | REACTANCE CHARACTERISTIC | INDUCTIVE |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.625 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 28.000 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 1.562 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 10.000 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AKNA | INCLOSURE TYPE | ENCASED |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39009 TO 1 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| STYL | STYLE DESIGNATOR | |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.938 |
| MATT | MATERIAL | HEAT SINK ALUMINUM ALLOY |
| BYML | MOUNTING HOLE SIZE | INCHES NOMINAL 0.125 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RER75F28R0R | 81349 |
| RE75G28R0 | 81349 |
| MIL-PRF-39009/1 | 81349 |
| MIL-R-39009/1 | 81349 |
| RER75F28R0M | 81349 |
| RER75F28R0P | 81349 |
| MILR18546 | 81349 |
| RH50X000B28R00F | 91637 |
| RH50-280HMSP0RM3 | 91637 |
Supersedes
This item replaces cancelled NIIN 008486774. An older drawing citing one of those numbers resolves here.