NSN 5905-00-302-5872 · NIIN 003025872 · FSC 5905
NO DASHES 5905003025872
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| CXHN | SHAFT BEARING TYPE | BEARING |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.419 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.375 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22097 TO 4 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.375 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.150 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.150 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.375 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.072 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.075 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -250.0 TO 250.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22097 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| AEDX | SHAFT STYLE |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILR22097-4 | 81349 |
| RJ24CL203 | 81349 |
| RJR24CL203P | 81349 |
| MIL-R-39035/2 | 81349 |
| 3522 500 12632 | H0203 |
| 4171788-243 | 05869 |
Supersedes
This item replaces cancelled NIINs 010422766 · 010866007. An older drawing citing one of those numbers resolves here.