NSN 5905-00-320-9862 · NIIN 003209862 · FSC 5905
NO DASHES 5905003209862
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.5 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.487 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.826 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.500 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.70 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.249 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.437 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED UPPER ADJACENT SIDE TWO ROWS |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.124 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 1300.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.25 TO 0.25 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 1300.0 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.35 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.6250 |
| AEFY | SHAFT END PLAY | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.625 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.5000 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE |