NSN 5905-00-320-9867 · NIIN 003209867 · FSC 5905
NO DASHES 5905003209867
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AAQL | BODY STYLE | |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 85.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEDX | SHAFT STYLE | |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.000 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.582 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 3.0000 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 20.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS 360 DEG SINE-COSINE |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 3.50 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.000 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.750 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 5.0 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 3.000 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0730 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0730 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS 0.0 TO 130.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 6 |
| AAPN | SECTION QUANTITY | 2 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 2.8750 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 53913 | 24930 |