NSN 5905-00-320-9878 · NIIN 003209878 · FSC 5905
NO DASHES 5905003209878
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 3.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 8 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.750 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.6200 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AAPN | SECTION QUANTITY | 2 |
| AEDX | SHAFT STYLE | |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | ALL SECTIONS 180.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 340.0 |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.500 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| AAQL | BODY STYLE | |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION ALL SECTIONS -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -3.0 TO 3.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 2.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.781 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -2.00 TO 2.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.4990 AND INCHES MAXIMUM 1.5000 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 93865 | 81205 |
| RV1 5-8S37A | 99957 |
| 162C243 | 02297 |
| 93865 | 03848 |
| RV1 5/8-S37A | 04454 |
| AMB416 | 19176 |