NSN 5905-00-325-9264 · NIIN 003259264 · FSC 5905
NO DASHES 5905003259264
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 6.000 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| PKWT | UNPACKAGED UNIT WEIGHT | GRAMS 8.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39009 TO 1 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| BYML | MOUNTING HOLE SIZE | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.099 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.133 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AFWW | TERMINAL WIDTH | INCHES MINIMUM 0.140 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| STYL | STYLE DESIGNATOR | |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AAPP | ELECTRICAL RESISTANCE | KILOHMS 1.000 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.688 AND INCHES MAXIMUM 0.812 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.500 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.437 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.374 |
| AKNA | INCLOSURE TYPE | ENCASED |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AL10-1KDHMPORM1PCT | 52494 |
| MIL-PRF-39009/1 | 81349 |
| RE65G1001 | 81349 |
| MIL-R-39009/1 | 81349 |
| RF65G1001 | 81349 |
| RER65F1001P | 81349 |
| RER65F1001R | 81349 |
| 70755 | 83311 |
| RH-10-1K 0HMS 3% | 91637 |
| RH101001F | 91637 |
| RH10-1K10W | 91637 |
| RH10X000B10000F | 91637 |
| 443-1606-460 | 94756 |
| 3010M1000-1 | 00213 |
| 042-1001 | 12175 |
| 10630283-241 | 18876 |
Supersedes
This item replaces cancelled NIINs 003622929 · 004010632 · 006821274 · 007114047. An older drawing citing one of those numbers resolves here.