NSN 5905-00-399-7762 · NIIN 003997762 · FSC 5905
NO DASHES 5905003997762
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.002 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.875 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS GRAPH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.8740 AND INCHES MAXIMUM 1.8750 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.995 AND INCHES MAXIMUM 2.005 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 20.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -2.00 TO 2.00 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 85.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.969 AND INCHES MAXIMUM 1.031 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 3.079 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.9950 AND INCHES MAXIMUM 2.0050 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 3.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.25 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 15 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2091272 |