NSN 5905-00-410-1295 · NIIN 004101295 · FSC 5905
NO DASHES 5905004101295
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFWW | TERMINAL WIDTH | INCHES MINIMUM 0.085 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.289 AND INCHES MAXIMUM 0.351 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.204 AND INCHES MAXIMUM 0.328 |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 49.900 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.064 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.538 AND INCHES MAXIMUM 0.662 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.272 AND INCHES MAXIMUM 0.396 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39009 TO 1 |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 0.434 AND INCHES MAXIMUM 0.454 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 3.000 |
| PKWT | UNPACKAGED UNIT WEIGHT | GRAMS 3.0 |
| STYL | STYLE DESIGNATOR | |
| AKNA | INCLOSURE TYPE | ENCASED |
| BYML | MOUNTING HOLE SIZE | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2089976-0710 | 27914 |
| RE60G49R9E | 81349 |
| MIL-PRF-39009/1 | 81349 |
| RER60F50R0P | 81349 |
| RER60F50R0M | 81349 |
| MIL-R-39009/1 | 81349 |
| RER60F49R9R | 81349 |
| RER60F49R9P | 81349 |
| RH-5-500HMP0RM1P | 91637 |
| ERH5-49R9F | 91637 |
| ERH5-49.9OHMPORM | 91637 |
| RH5G50R0 | 91637 |
| RH-5-50 0HMS 1% | 91637 |
Supersedes
This item replaces cancelled NIINs 013282692 · 014853617 · 012194834. An older drawing citing one of those numbers resolves here.