NSN 5905-00-429-0991 · NIIN 004290991 · FSC 5905
NO DASHES 5905004290991
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 70.0 |
| FEAT | SPECIAL FEATURES | LINEAR, 2.25 W, DOUBLE, PANEL MOUNT |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 6 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.531 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.875 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.266 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.484 |
| AEDX | SHAFT STYLE | |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| AAQL | BODY STYLE | |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 250.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 309.0 AND MAXIMUM 320.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS ALL SECTIONS -3.0 TO 0.0 AND -25 DEG CELSIUS ALL SECTIONS -5.0 TO 10.0 AND 25 DEG CELSIUS ALL SECTIONS -5.0 TO 10.0 AND 120 DEG CELSIUS ALL SECTIONS 0.0 TO 3.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 120.0 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.172 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 12.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AAPN | SECTION QUANTITY | 2 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.094 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 60009-061 | 21439 |
| 631663-051 | 56232 |
| MILR94-6 | 81349 |
| 2RV7NYSD254254A | 81349 |
| MIL-PRF-94/6 | 81349 |
| JD2G056P254UA | 01121 |
| JD1N056S254MA | 01121 |
| JD2N048P254UA | 01121 |
Supersedes
This item replaces cancelled NIINs 001738092 · 001739044 · 002791811 · 004927660 · 007222465 · 007892196 · 009578624. An older drawing citing one of those numbers resolves here.