NSN 5905-00-465-8832 · NIIN 004658832 · FSC 5905
NO DASHES 5905004658832
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.205 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 25.000 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| AXGY | MOUNTING METHOD | TERMINAL |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.500 |
| AEDX | SHAFT STYLE | |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.712 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.172 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.540 |
| AAPN | SECTION QUANTITY | 1 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILR22097 TO 3 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -100.0 TO 100.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.078 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 0.555 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.205 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.035 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILR22097-3 | 81349 |
| RJ22FX253 | 81349 |