NSN 5905-00-470-5067 · NIIN 004705067 · FSC 5905
NO DASHES 5905004705067
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BYDT | BEARING TYPE | SHAFT BEARING |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0730 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -5.0 TO 5.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPN | SECTION QUANTITY | 1 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.312 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.437 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.1249 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.250 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.4370 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.40 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.40 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION PROPORTIONAL CONFORMITY |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.25 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 65.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 82340-58860 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 5 |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 2 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 2222.0 AND SINGLE SECTION 2222.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.31200 AND INCHES MAXIMUM 1.31250 |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |