NSN 5905-00-471-5101 · NIIN 004715101 · FSC 5905
NO DASHES 5905004715101
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AAPN | SECTION QUANTITY | 1 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.688 |
| AAQL | BODY STYLE | |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.313 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 2.5 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 300.0 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.063 |
| AEDX | SHAFT STYLE | |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 12.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 300.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.250 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 6:00 OCLOCK |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.625 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 1 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RP061SB2R5KK | 81349 |
| M22/01-00031SB | 81349 |
| MIL-PRF-22/1 | 81349 |
| MILR22-1 | 81349 |
| 5905PL0946572 | 9009H |
| 4171783-104 | 05869 |