NSN 5905-00-475-0573 · NIIN 004750573 · FSC 5905
NO DASHES 5905004750573
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.112 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.000 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0600 |
| AAPN | SECTION QUANTITY | 1 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.438 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.50 TO 1.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.0295 AND INCHES MAXIMUM 1.0300 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.4000 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.10 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.06 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -2.0 TO 2.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 500.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 348.0 |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0600 |
| AEDX | SHAFT STYLE | |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.0930 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.625 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 100.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 4 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.340 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.093 |