NSN 5905-00-478-4909 · NIIN 004784909 · FSC 5905
NO DASHES 5905004784909
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -100.0 TO 100.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.084 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| AAPN | SECTION QUANTITY | 1 |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.110 |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.036 AND INCHES MAXIMUM 0.080 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.218 AND INCHES MAXIMUM 1.282 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.330 |
| AEDX | SHAFT STYLE | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22097 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 8.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.130 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| CXHN | SHAFT BEARING TYPE | BEARING |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22097 TO 2 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3009Y-1-502 | 32997 |
| 134737-0018 | 65597 |
| RJ12FY502 | 81349 |
| MIL-PRF-39035/1 | 81349 |
| RJR12CY502P | 81349 |
| MIL-R-22097/2 | 81349 |
| MIL-PRF-22097/2 | 81349 |
| MIL-R-39035/1 | 81349 |
| 5905PL1296785 | 9009H |
| R10R78 | 01121 |
| 7745138P4 | 03538 |
| 4707-0031-009 | 15280 |
| 378771-9 | 14028 |
Supersedes
This item replaces cancelled NIINs 000457722 · 011219048 · 012201499. An older drawing citing one of those numbers resolves here.