NSN 5905-00-481-0870 · NIIN 004810870 · FSC 5905
NO DASHES 5905004810870
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 30.100 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQA | HEAT SINK LENGTH | INCHES 7.000 |
| STYL | STYLE DESIGNATOR | |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.594 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.438 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.938 |
| AAQE | HEAT SINK THICKNESS | INCHES 0.040 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.625 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 1.562 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 10.000 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39009 TO 1 |
| AKNA | INCLOSURE TYPE | ENCASED |
| AAQB | HEAT SINK WIDTH | INCHES 5.000 |
| AAQD | HEAT SINK HEIGHT | INCHES 2.000 |
| MATT | MATERIAL | HEAT SINK ALUMINUM ALLOY |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| BYML | MOUNTING HOLE SIZE | INCHES NOMINAL 0.125 |
Cross-references
25 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AL-50-30OHM-3PCT | 54294 |
| RER75G30R1M | 81349 |
| RER75F30R1 | 81349 |
| RER75F3R00 | 81349 |
| RER75F30RIM | 81349 |
| MIL-PRF-39009/1 | 81349 |
| MIL-R-39009/1 | 81349 |
| RER75F30R0M | 81349 |
| RER75F30R1M | 81349 |
| RER75F30R1R | 81349 |
| RFR75F30RIM | 81349 |
| RE75G30R0 | 81349 |
| RER75F30R0R | 81349 |
| RER75F30R1P | 81349 |
| A35-7-31 | 82005 |
| RH50-30P0RM1PCT | 91637 |
| RH50-300HM1PCT | 91637 |
| RH50X000B30R00F | 91637 |
| RH50X000F30R00F | 91637 |
| RH-50-30OHMPORM3PCT | 91637 |
| 000-807-948 | 94756 |
| 538201-239 | 96214 |
| RH-50-30R+/-1% | C2169 |
| RH-50-30R+/-1% | D1018 |
| 50CH300HMS5PCT | 06416 |
Supersedes
This item replaces cancelled NIINs 004911937 · 009656456 · 010599660. An older drawing citing one of those numbers resolves here.