NSN 5905-00-483-0170 · NIIN 004830170 · FSC 5905
NO DASHES 5905004830170
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
44 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 180.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 4 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.8200 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.375 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.968 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.062 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.25 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 12.5 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.120 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.625 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.750 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.264 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.0620 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 50222-204853 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -17.36 TO 17.36 AND OHMS SINGLE SECTION -0.5 TO 0.5 |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 6250.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |