NSN 5905-00-489-6762 · NIIN 004896762 · FSC 5905
NO DASHES 5905004896762
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Application: TICONDEROGA CLASS CG(47); ARLEIGH BURKE CLASS DDG; SUBMARINE ENGINEERING AND DIESEL S; STURGEON CLASS SSN(637); 2M/ATE MICROMINIAUTURE AUTOMATIC TEST ; AN/SRN-25(V) NAVIGATION RADIO SET; SEAWOLF CLASS SSN; AIRC
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.375 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 5.00 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39015 TO 3 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | TICONDEROGA CLASS CG(47); ARLEIGH BURKE CLASS DDG; SUBMARINE ENGINEERING AND DIESEL S; STURGEON CLASS SSN(637); 2M/ATE MICROMINIAUTURE AUTOMATIC TEST ; AN/SRN-25(V) NAVIGATION RADIO SET; SEAWOLF CLASS SSN; AIRC |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.100 |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.026 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.375 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.182 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.300 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.075 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.080 |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39015 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LOWER ADJACENT SIDE TWO ROWS |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3290P900-502 | 80294 |
| RTR240W502P | 81349 |
| MIL-R-39015/3 | 81349 |
| M39015/3-009PR | 81349 |
| RTR24DP502M | 81349 |
| JM39015-3-009XP | 81349 |
| 444-0466-009 | 94756 |
| 315-019-109 | 07421 |
| 126-5K | 17826 |
Supersedes
This item replaces cancelled NIINs 001368090 · 004550829 · 009019900. An older drawing citing one of those numbers resolves here.