NSN 5905-00-500-7588 · NIIN 005007588 · FSC 5905
NO DASHES 5905005007588
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 2.469 AND INCHES MAXIMUM 2.531 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.390 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.032 AND INCHES MAXIMUM 1.156 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 5 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.515 AND INCHES MAXIMUM 0.547 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.515 |
| AEDX | SHAFT STYLE | |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 309.0 AND MAXIMUM 320.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.468 AND INCHES MAXIMUM 0.656 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.937 AND INCHES MAXIMUM 3.187 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 191-0635-002 | 75102 |
| MILR94-5 | 81349 |
| RV4NAYFK102B | 81349 |
| RV4NAYSK102A | 81349 |
| RV4NAYFK102A | 81349 |
| MIL-PRF-94/5 | 81349 |
| RV4NATSD102A | 81349 |
| 317-102-008 | 07421 |
Supersedes
This item replaces cancelled NIINs 000616058 · 001863115 · 005007877 · 005429636 · 005525420 · 005428042 · 005777033 · 006657973 · 006603514 · 006836461 · 008162254 · 008414585. An older drawing citing one of those numbers resolves here.