NSN 5905-00-505-4054 · NIIN 005054054 · FSC 5905
NO DASHES 5905005054054
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.062 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.625 |
| AAPN | SECTION QUANTITY | 2 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 73342-6815441 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 310.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.00 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.6560 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.3100 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.906 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2ND SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS 2ND SECTION -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 5.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 310.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 7 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2ND SECTION 2500.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AAQL | BODY STYLE | |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.891 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 1.9060 |