NSN 5905-00-517-9764 · NIIN 005179764 · FSC 5905
NO DASHES 5905005179764
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 3.00 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.105 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.050 |
| AAQL | BODY STYLE | |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.010 |
| AAPN | SECTION QUANTITY | 1 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | TERMINAL |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.145 AND INCHES MAXIMUM 0.185 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 3600.0 AND MAXIMUM 9000.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 4320.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.105 |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.173 AND INCHES MAXIMUM 0.203 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -250.0 TO 250.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.25 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22097 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22097 TO 5 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 3.00 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.205 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3262X-1-202 | 32997 |
| 3262X1-202 | 80294 |
| RJ26CX202 | 81349 |
| MIL-R-22097/5 | 81349 |
| 5905PL0975601 | 9009H |
| 538118-8 | 96214 |
| 4545410 | D0894 |
| 442-006-058 | A1997 |
| 442-006-058 | C3141 |